DIMPBDA

Dimmer Digital Push Button Trailing Edge 350W Amber LED 2W Min Wh Bk Curved Button Inc Suit FLPUCO

SKU

DIMPBDA

Box Qty

Categories

Dimmers

DIMPBDA Push Button Digital Dimmer and ON/OFF switch in one - perfect for dimmable LED.
Multi-Way Dimming and Switching when used in conjunction with MEPBMWA slave unit. Push Button Multi-Way Remote.
Wider range - Deep Dimming to Zero on most lamps.
Programmable minimum brightness.
Double tap when ON - lights dim down to OFF over 30 minutes.
Double tap when OFF - turn lights ON at previous level and ramps to full brightness over 30 minutes.
Restarts OFF and retains settings after power loss.
Improved patented ripple tone filtering.
Rugged Over Current, Over Voltage and Over Temperature protection.
Illuminated LED - configurable.
Trailing Edge dimming with linear response.
Suits both Trader and Clipsal* wall plates.
Supplied with MEBU Gloss White & Gloss Black buttons, suits Puma, Cougar & Flat Cat gloss finishes.
NOT SUITABLE FOR FANS AND MOTORS. OPERATING CONDITIONS
Operating Voltage: 230-240Va.c. 50Hz
Maximum Load: 350W (see table below)
Minimum Load: 1W
Maximum Current Capacity: 1.5A
Connection Type: Flying leads with bootlace terminals
Operating Temperature: 0 to +50 °C
Certified Standard: AS/NZS 60669.2.1, CISPR15 Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.-